Mica

micaflakesMica 8

Mica 8 is micronized to a 620 micron average particle size with a maximum retention of 1% at 2.5 mm.

TDS Mica 8

MSDS - Mica 8

Mica 30

Mica 30 is milled, delaminated and screened to a 180 micron average particle size with no retention at 425 micron.

TDS Mica 30

/MSDS Mica 30

Mica 40
Mica 40 is micronized to a 180 micron average particle size with a maximum retention of 10% at 710 micron.

TDS Mica 40

MSDS Mica 40

Mica 60
Mica 60 is micronized to a 60 micron average particle size with a maximum retention of 1% at 425 micron.

TDS Mica 60

MSDS Mica 60

Mica 80

Mica 80 is micronized to a 45 micron average particle size with no retention at 250 micron.

TDS Mica 80

MSDS Mica 80

Maxiglass
Maxiglass has been specifically developed as a reinforcing extender in glass reinforced polyester (GRP), glass reinforced concrete and thermosetting polymers such as epoxy's and formaldehyde resins. Maxiglass is produced from pure muscovite mined in Southern Africa. After drying, the product is highly delaminated in a specialised reduction process to provide for a high aspect ratio (platelet diameter to thickness) two-dimensional platelet. The low cation exchange capacity and inertness of Maxiglass render it particularly suitable to the demanding requirements of thermosetting polymers and cement based products. Maxiglass offers a two-dimensional reinforcement at a substantial cost advantage over conventional inorganic or organic fibre reinforcements. The unique properties of Maxiglass increase flexural and tensile strength and modulus. No special mixing apparatus are required as the product has an inbuilt disperse diluency characteristic. The negligible oil absorption leads to very slight resin demand compared with alternate mineral fillers.

The low caution exchange capacity and inertness of Maxiglass render it particularly suitable to the demanding requirements of thermosetting polymers and cement based products

Mica 325 is micronized to a 5 micron average particle size with a maximum retention of 15% at 10 micron.

TDS Mica 325

MSDS Mica 325